News
Bending steel glass: comparison between tempered glass and semi-tempered glass
Release time:
2022-01-26 12:32
Source:
Bent steel glass manufacturers to popularize the comparison and difference between tempered glass and semi-tempered glass
bent steel glassManufacturer: Theoretical analysis of tempered glass processing technology
Whether the quality of tempered glass can meet the standard, in addition to the reasons for the glass raw materials, whether the setting of process parameters is reasonable is a decisive factor. Only by thoroughly understanding their functions and the relationship between them can high-quality tempered glass be produced.
All parameters are designed around "uniform heating and rapid cooling", but they are not isolated, they are an organic whole, and must be considered comprehensively to get a perfect process.
Bent steel glass manufacturers: choose building safety glass should pay attention to the following points
1. building toughened glass belongs to the national CCC compulsory certification products, certification enterprise products affixed with 3C certification mark. bent steel glass
2. Check the appearance quality of the glass. Glass with edge explosions, scratches and defects may cause bursting and reduced strength during use.
3. Measure whether the glass is bent too much, because the excessively bent glass will produce installation stress during or after installation, and the possibility of bursting will increase.
Check the quality of the glass edge, the tempered glass with high grinding quality has high strength and low self-explosion rate.
bent steel glassManufacturer: comparison of tempered glass and semi-tempered glass
1. Safety: When the tempered glass is broken, the whole glass is broken into small particles, so that when people touch the broken glass or fall from a tall building, it will not cause serious injury to people, but when the semi-tempered glass is broken, the whole glass Cracks expand from the force point to the edge, showing a radioactive state, most of the glass remains in the frame, semi-tempered glass is the same as ordinary glass, falling off a building can do a lot of harm.
2. Strength: The strength of semi-tempered glass is more than twice that of float annealed glass, and the strength of tempered glass is more than 4 times that of float annealed glass. bent steel glass
3. Thermal stability: The thermal stability of semi-tempered glass is twice that of the original annealed glass, but it is lower than tempered glass. Reworkability: semi-tempered glass is the same as tempered glass and cannot be reprocessed. When reprocessing, the glass will break.
4. Self-explosion: Tempered glass has self-explosion due to nickel sulfide impurities or excessive tempering, and semi-tempered glass is easy to avoid self-explosion.
5. Smoothness: The bow and wave deformation of semi-tempered glass is smaller than that of tempered glass. This good flatness is conducive to reprocessing into semi-tempered coated glass or semi-tempered laminated glass. bent steel glass
The small editor of bent steel glass manufacturer has been introduced here. Thank you for watching. I hope it will be helpful to you through the above introduction. In addition, if you need household appliance glass, coated glass, bent steel glass, lighting glass, Shi Ying glass, switch glass panel, optical glass, glass panel, glass tube, tempered glass and glass processing, you can contact our company.
Related News
Professional Glass Tube Custom Processing Service-Quartz Glass Tube & Borosilicate Glass Tube Expert
We are a professional glass tube custom processing factory, focusing on providing high quality quartz glass tube and high borosilicate glass tube products.
Touch switch panel glass: the perfect combination of aesthetics and function
With the continuous progress of science and technology, touch switch panel glass is becoming more and more common in modern home design.
Touch switch panel glass: new trend of smart home control
With the continuous development of science and technology, the concept of smart home has been deeply rooted in the hearts of the people.
Touch switch panel glass: comfortable experience under the progress of science and technology
The touch switch panel glass is a new type of switch control method. It uses touch technology and glass materials to make the switch panel have a higher touch and aesthetics.
Dry goods sharing, one minute to take you to understand the screen printing glass panel
Screen printing glass panel is a technology that prints a pattern on the glass surface.
What are the advantages of silk screen glass panel?
Screen printing is a method of screen printing glass panels which use screen to print glass panels.
Service Hotline:
Tel:+86 0769-81016119
Contact: Mr. He+86 13580724335 Miss Yuan+86 18929456019
QQ: Mr. He1263696683 Miss Yuan927618771
E-mail:13580724335@163.com 927618771@qq.com
Fax:+86 0769-27200047
Address: No.1, Fulong Industrial 4th Road, shipai town, Dongguan City
Sweep to learn more
Privacy Policy | SEO | CitySite | Powered by: 300.cn Dongguan