News
About the car start-stop button glass, let's take a look
Release time:
2022-12-19 09:48
Source:
At present, automobile start-stop button glass is mainly divided into laminated glass and tempered glass. Laminated glass is two layers of glass with a layer of colloidal film in the middle, which will not completely crack and spread when damaged or broken. Even if a serious collision occurs, the plastic film in the middle can ensure that the glass will not fall off and partially scattered in the case of serious damage, and still maintain relative integrity. Because of this feature, in order to ensure the driver's complete awareness and safety after the impact, it is requiredCar start-stop key glassInstall laminated glass on the use.
When the tempered glass is damaged, it will quickly spread into countless small particles, which are easy to fall off and facilitate escape in an emergency. Moreover, the probability of being hit by stones on the side and back of the car is less than that of the front windshield, so tempered glass is widely used in other parts except the front windshield.
Based on the above characteristics, the front windshield of the current models on sale uses laminated glass, and cracks can be repaired. In addition to the front bumper, the tempered glass around the window will quickly spread or even fall off due to damage and cannot be repaired. So the so-called glass repair, is for the front windshield service.
Under normal circumstances, the damage to the glass of the car's start-stop button is nothing more than the pebbles rolled up by the car at high speed. Although the pebbles are not big, they are fast and irregular in shape, which can often smash the glass into pieces in an instant. The range of cracks broken by pebbles is usually small, with a diameter of about 5mm. In this case, the owner should go to a professional repair shop to repair the glass as soon as possible, the sooner the better. However, if the damaged body exceeds 20mm, the repair effect will be very poor, and the general shop will recommend replacing the glass.
It is not recommended to repair the car start-stop button glass is really not good?
Many friends will ask, the value of a car start-stop key glass is usually not low, many people will not be individually insured against glass breakage. Wouldn't it be a waste to suggest a replacement for minor damage? Can I use it?
In fact, beyond the range of 20mm, as long as it is not exaggerated, it can be repaired, but the strength after repair cannot be guaranteed. When the high-speed wind resistance increases, or the car start-stop button glass is frequently subjected to car washing, rain and snow, wind and sand and other stresses, the strength of the glass cannot be guaranteed, and there is a certain safety hazard. Here, our suggestion is not to repair it if it exceeds 2cm, and to replace it with a new one as soon as possible.Car start-stop key glassTo avoid larger cracks in the glass during use. What kind of damage is easy to repair?
Because the damage is caused by the rolling stone, the damage area is generally not large. However, due to the irregular surface of the stone, the impact trajectory is irregular, and the shape of the damage point is varied. According to professionals, if the broken part presents a circular contour, this kind of damage is easier to repair, and the repair effect is good, because the circular broken contour can support the complete glass around, which is easier to repair than those spreading many cracks.
Related News
Professional Glass Tube Custom Processing Service-Quartz Glass Tube & Borosilicate Glass Tube Expert
We are a professional glass tube custom processing factory, focusing on providing high quality quartz glass tube and high borosilicate glass tube products.
Touch switch panel glass: the perfect combination of aesthetics and function
With the continuous progress of science and technology, touch switch panel glass is becoming more and more common in modern home design.
Touch switch panel glass: new trend of smart home control
With the continuous development of science and technology, the concept of smart home has been deeply rooted in the hearts of the people.
Touch switch panel glass: comfortable experience under the progress of science and technology
The touch switch panel glass is a new type of switch control method. It uses touch technology and glass materials to make the switch panel have a higher touch and aesthetics.
Dry goods sharing, one minute to take you to understand the screen printing glass panel
Screen printing glass panel is a technology that prints a pattern on the glass surface.
What are the advantages of silk screen glass panel?
Screen printing is a method of screen printing glass panels which use screen to print glass panels.
Service Hotline:
Tel:+86 0769-81016119
Contact: Mr. He+86 13580724335 Miss Yuan+86 18929456019
QQ: Mr. He1263696683 Miss Yuan927618771
E-mail:13580724335@163.com 927618771@qq.com
Fax:+86 0769-27200047
Address: No.1, Fulong Industrial 4th Road, shipai town, Dongguan City
Sweep to learn more
Privacy Policy | SEO | CitySite | Powered by: 300.cn Dongguan